Mould and damp walls are a common household problem- and a pesky one at that.
Check Structure
Cracks and damages to your foundations, walls or ceilings, easily let water seep in. If you notice that you do have leaks, it’s best that you contact a plumber to get the issue seen to at once. It’s also better to be safe when you have leaks involved that could mess up your electrical wiring. There are Electricians Sydney at your beck and call if your power starts acting up due to a weakness in the structure of your house. To prevent any water from getting into the house in other ways, make sure to clean out your gutter regularly as well as keep the doors and windows tightly sealed.
Humidity Levels
Your humidity levels should be reduced since they can create the perfect breeding source for mould. This can be combatted in many ways. For one, you can install vents to control the inflow and outflow of moisture in the air. Two, you can have a fan on or the windows open while you cook or shower to allow an outlet for the moisture collecting in the air.
Cleanliness
Using substances like chlorine to clean damp surfaces in the bathroom or kitchen prone to mould will significantly help. When it comes to carpets, you’ll have to use cleaners to make sure these areas are dry at all times.
Find the Problem
There’s no point cleaning away the mould without first finding out what is supplying it with the moisture to grow. If it’s a leaky pipe, you’ll have to get that fixed before seeing to the mould. Once this is done, you can use towels or dryers to completely dry the area and wipe off the moisture.
Protection
Mould can be bad for your health so if you intend on cleaning it on your own, wear the necessary equipment so you’ll be able to have minimal contact with the substance. It’s best that you get yourself a face mask, long gloves and goggles as well.
Repairing
When extensive damage is involved, you might need professional help to get new flooring done or drywall installation. However, one thing you absolutely must not do is paint over the mould. This will result in it peeling and flaking and won’t solve the problem. If you really want to repaint, first get rid of the mould by scrubbing the area vigorously with a mixture of water and detergent, and then completely dry it with towels and fans. Once this is done, you can get started on your paint job.
This is how you deal with mould and damp areas. If it’s a severe case, don’t put your health in jeopardy. Contact the professional and let them analyse the situation.